Managing Serviceguard 12th Edition, March 2006

Building an HA Cluster Configuration
Creating the Storage Infrastructure and Filesystems with LVM and VxVM
Chapter 5 221
# vxprint -g logdata
The output of this command is shown in the following example:
TY NAME ASSOC KSTATE LENGTH PLOFFS STATE
TUTILO PUTILO
v logdata fsgen ENABLED 1024000 ACTIVE
pl logdata-01 system ENABLED 1024000 ACTIVE
NOTE The specific commands for creating mirrored and multi-path storage
using VxVM are described in the VERITAS Volume Manager Reference
Guide.
Creating File Systems
If your installation uses filesystems, create them next. Use the following
commands to create a filesystem for mounting on the logical volume just
created:
1. Create the filesystem on the newly created volume:
# newfs -F vxfs /dev/vx/rdsk/logdata/log_files
2. Create a directory to mount the volume:
# mkdir /logs
3. Mount the volume:
# mount /dev/vx/dsk/logdata/log_files /logs
4. Check to make sure the filesystem is present, then unmount the
filesystem:
# umount /logs
Deporting Disk Groups
After creating the disk groups that are to be used by Serviceguard
packages, use the following command with each disk group to allow the
disk group to be deported by the package control script on other cluster
nodes:
# vxdg deport <DiskGroupName>