Managing Serviceguard 11th Edition, Version A.11.16, Second Printing June 2004

Troubleshooting Your Cluster
Replacing Disks
Chapter 8 329
5. Replace or upgrade hardware on the node, as needed.
6. Halt all nodes connected to the shared SCSI bus, and power them
down.
7. Reconnect the node to the in-line terminator cable or Y cable if
necessary.
8. Power-on the nodes in the cluster. If AUTOSTART_CMCLD is set to 1 in
the /etc/rc.config.d/cmcluster file, the nodes will automatically
start the cluster and the packages.
9. If necessary, move packages back to the node from their alternate
locations and restart them.