Managing Serviceguard 11th Edition, Version A.11.16, Second Printing June 2004

Configuring Packages and Their Services

Writing the Package Control Script

Chapter 6 263

# The cvm disk group activation method is defined above. The filesystems

# associated with these volume groups are specified below in the CVM_*

# variables.

#CVM_DG[0]=””

# VxVM DISK GROUPS

# Specify which VxVM disk groups are used by this package. Uncomment

# VXVM_DG[0]=”” and fill in the name of your first disk group. You must

# begin with VXVM_DG[0], and increment the list in sequence.

# For example, if this package uses your disk groups dg01 and dg02, enter:

# VXVM_DG[0]=dg01

# VXVM_DG[1]=dg02

# The cvm disk group activation method is defined above.

#VXVM_DG[0]=””

# NOTE: A package could have LVM volume groups, CVM disk groups and VxVM

# disk groups.

# NOTE: When VxVM is initialized it will store the hostname of the

# local node in its volboot file in a variable called ‘hostid’.

# The MC Serviceguard package control scripts use both the values of

# the hostname(1m) command and the VxVM hostid. As a result

# the VxVM hostid should always match the value of the

# hostname(1m) command.

# If you modify the local host name after VxVM has been

# initialized and such that hostname(1m) does not equal uname -n,

# you need to use the vxdctl(1m) command to set the VxVM hostid

# field to the value of hostname(1m). Failure to do so will

# result in the package failing to start.

# FILESYSTEMS

# Filesystems are defined as entries specifying the logical volume, the

# mount point, the mount, umount and fsck options and type of the file system.

# Each filesystem will be fsck’d prior to being mounted. The filesystems

# will be mounted in the order specified during package startup and will

# be unmounted in reverse order during package shutdown. Ensure that

# volume groups referenced by the logical volume definitions below are

# included in volume group definitions above.