Managing Serviceguard 11th Edition, Version A.11.16, Second Printing June 2004

Configuring Packages and Their Services
Creating the Package Configuration
Chapter 6 249
# Enter the complete path for the run and halt scripts. In most cases
# the run script and halt script specified here will be the same script,
# the package control script generated by the cmmakepkg command. This
# control script handles the run(ning) and halt(ing) of the package.
# Enter the timeout, specified in seconds, for the run and halt scripts.
# If the script has not completed by the specified timeout value,
# it will be terminated. The default for each script timeout is
# NO_TIMEOUT. Adjust the timeouts as necessary to permit full
# execution of each script.
# Note: The HALT_SCRIPT_TIMEOUT should be greater than the sum of
# all SERVICE_HALT_TIMEOUT values specified for all services.
RUN_SCRIPT
RUN_SCRIPT_TIMEOUT NO_TIMEOUT
HALT_SCRIPT
HALT_SCRIPT_TIMEOUT NO_TIMEOUT
# Enter the names of the storage groups configured for this package.
# Repeat this line as necessary for additional storage groups.
#
# Storage groups are only used with CVM disk groups. Neither
# VxVM disk groups or LVM volume groups should be listed here.
# By specifying a CVM disk group with the STORAGE_GROUP keyword
# this package will not run until the VxVM-CVM-pkg package is
# running and thus the CVM shared disk groups are ready for
# activation.
#
# NOTE: Should only be used by applications provided by
# Hewlett-Packard.
#
# Example : STORAGE_GROUP dg01
# STORAGE_GROUP dg02
# STORAGE_GROUP dg03
# STORAGE_GROUP dg04
#
# Enter the SERVICE_NAME, the SERVICE_FAIL_FAST_ENABLED and the
# SERVICE_HALT_TIMEOUT values for this package. Repeat these
# three lines as necessary for additional service names. All
# service names MUST correspond to the SERVICE_NAME[] entries in
# the package control script.
#
# The value for SERVICE_FAIL_FAST_ENABLED can be either YES or
# NO. If set to YES, in the event of a service failure, the
# cluster software will halt the node on which the service is
# running. If SERVICE_FAIL_FAST_ENABLED is not specified, the