HP Serviceguard Version A.11.17 on HP-UX 11i v3 Release Notes, February 2007

Serviceguard Version A.11.17 on HP-UX 11i v3 Release Notes
Installing Serviceguard on HP-UX 11i v3
Chapter 142
• /usr/contrib/bin/cmfmtfr
• /usr/contrib/Q4/lib/q4lib/cmfr.pl
• /var/adm/cmcluster/frdump.cmcld.x (where x is a digit)
NOTE If you did a swremove of an older version of Serviceguard before the
swinstall, a zero-length binary configuration file
(/etc/cmcluster/cmclconfig) may be left on your system. Remove this
file before you issue the swinstall command. If you do not remove the
zero-length binary configuration file, the installation will proceed
correctly, but you may see error or warning messages such as:
Bad binary config file directory format.
Could not convert old binary configuration file.
These messages may safely be ignored.
If You Need To Disable identd
CAUTION HP does not recommend disabling this security feature, as it maintains
the integrity and high availability of your data.
If you must disable identd, do it after installing Serviceguard but before
each node re-joins the cluster (for example, just before issuing the
cmrunnode or cmruncl command).
Instructions are in Chapter 5 of the Managing Serviceguard manual,
under the heading “Username Validation” in the section “Editing
Security Files.”
Upgrading from an Earlier Serviceguard Release
• For information about supported Serviceguard upgrade paths, see
the support matrix at docs.hp.com -> High Availability ->
Support Matrixes.