HP Serviceguard Version A.11.17 on HP-UX 11i v3 Release Notes, February 2007

Serviceguard Version A.11.17 on HP-UX 11i v3 Release Notes
Compatibility Information and Installation Requirements
Chapter 138
not used and remote node security is resolved with the .rhosts facility
instead. (These rules apply only to target nodes running Serviceguard
versions earlier than A.11.16.)
Memory Requirements
Serviceguard needs approximately 15.5MB of lockable memory on each
cluster node.
NOTE Remember to tune the swap space and the HP-UX kernel parameters
nfile, maxfiles and maxfiles_lim to ensure that they are set high
enough for the number of packages you are configuring.
Port Requirements
Serviceguard uses the ports listed below. Before installing, check
/etc/services and be sure no other program has reserved these ports.
• discard 9/udp
• snmp 161/udp
• snmp 162/udp
• hacl-cs 1238/tcp
• clvm-cfg 1476/tcp
• hacl-hb 5300/tcp
• hacl-hb 5300/udp
• hacl-gs 5301/tcp
• hacl-gs 5301/udp
• hacl-cfg 5302/tcp
• hacl-cfg 5302/udp
• hacl-probe 5303/tcp
• hacl-probe 5303/udp
• hacl-local 5304/tcp
• hacl-test 5305/tcp