HP Serviceguard A.11.20- Managing Serviceguard Twentieth Edition, August 2011

Policy_Parameters:
POLICY_NAME CONFIGURED_VALUE
Failover configured_node
Failback manual
Script_Parameters:
ITEM STATUS MAX_RESTARTS RESTARTS NAME
Service up 0 0 service2
Service up 0 0 sfm_disk1_monitor
Subnet up 0 0 15.13.168.0
Generic Resource up sfm_disk1
Node_Switching_Parameters:
NODE_TYPE STATUS SWITCHING NAME
Primary up enabled ftsys10 (current)
Alternate up enabled ftsys9
NOTE: The Script_Parameters section of the PACKAGE output of cmviewcl shows the
Subnet status only for the node that the package is running on. In a cross-subnet configuration,
in which the package may be able to fail over to a node on another subnet, that other subnet is
not shown; see “Cross-Subnet Configurations” (page 30).
Quorum Server Status
If the cluster is using a Quorum Server for tie-breaking services, the display shows the server name,
state and status following the entry for each node, as in the following excerpt from the output of
cmviewcl -v:
CLUSTER STATUS
example up
NODE STATUS STATE
ftsys9 up running
Quorum Server Status:
NAME STATUS STATE
lp-qs up running
...
NODE STATUS STATE
ftsys10 up running
Quorum Server Status:
NAME STATUS STATE
lp-qs up running
CFS Package Status
If the cluster is using the Veritas Cluster File System (CFS), the system multi-node package
SG-CFS-pkg must be running on all active nodes, and the multi-node packages for disk group
and mount point must also be running on at least one of their configured nodes. If the cluster is
using the Veritas Cluster Volume Manager for raw access to disk groups (that is, without CFS),
SG-CFS-pkg must be running on all active nodes.
NOTE: Check the Serviceguard/SGeRAC/SMS/Serviceguard Manager Plug-in Compatibility
and Feature Matrix and the latest Release Notes for your version of Serviceguard for up-to-date
information about support for CVM and CFS (http://www.hp.com/go/hpux-serviceguard-docs).
The following is an example of cmviewcl output showing status for these packages:
cmviewcl -v -p SG-CFS-pkg
MULTI_NODE_PACKAGES
PACKAGE STATUS STATE AUTO_RUN SYSTEM
266 Cluster and Package Maintenance