Managing Serviceguard Eighteenth Edition, September 2010

NOTE: These commands make the disk and its data unusable by LVM, and allow it
to be initialized by VxVM. (The commands should only be used if you have previously
used the disk with LVM and do not want to save the data on it.)
You can remove LVM header data from the disk as in the following example (note that
all data on the disk will be erased): pvremove /dev/rdsk/c0t3d2
Then, use the vxdiskadm program to initialize multiple disks for VxVM, or use the
vxdisksetup command to initialize one disk at a time, as in the following example:
/usr/lib/vxvm/bin/vxdisksetup -i c0t3d2
Creating Disk Groups
Use vxdiskadm, or use the vxdg command, to create disk groups, as in the following
example:
vxdg init logdata c0t3d2
Verify the configuration with the following command:
vxdg list
NAME STATE ID
logdata enabled 972078742.1084.node1
240 Building an HA Cluster Configuration