Managing Serviceguard Eighteenth Edition, September 2010

• CFS, CVM, VxVM, and VxFS are not supported.
NOTE: This also applies if HOSTNAME_ADDRESS_FAMILY is set to IPV6.
• HPVM is not supported.
You cannot have a virtual machine that is either a node or a package if
HOSTNAME_ADDRESS_FAMILY is set to ANY or IPV6.
Cluster Configuration Parameters
You need to define a set of cluster parameters. These are stored in the binary cluster
configuration file, which is distributed to each node in the cluster. You configure these
parameters by editing the cluster configuration template file created by means of the
cmquerycl (1m) command, as described under “Configuring the Cluster ” (page 242).
NOTE: See “Reconfiguring a Cluster” (page 359) for a summary of changes you can
make while the cluster is running.
The following parameters must be configured:
CLUSTER_NAME The name of the cluster as it will appear in the
output of cmviewcl and other commands, and
as it appears in the cluster configuration file.
The cluster name must not contain any of the
following characters: space, slash (/), backslash
(\), and asterisk (*).
Cluster Configuration Planning 143