Serviceguard NFS Toolkit A.11.31.07 Release Notes (September 2010)

New Fixes in Version A.11.31.07

Serviceguard NFS Toolkit A.11.31.07 provides the following defect fixes:

Table 1 New Fixes in the Version A.11.31.07

Problem DescriptionCR ID

IPv6 support is enabled.QXCR1001030263

Syntax error in Serviceguard NFS modular package setup

can lead to unrecoverable system status.

QXCR1001004340

Compatibility Information and Installation Requirements

This section describes the compatibility information and installation requirements for the HP-UX

11i v3 September 2010 release. For specific installation instructions, see Serviceguard NFS Toolkit

A.11.11.06, A.11.23.05 and A.11.31.07 Administrator's Guide HP-UX 11i v1, v2 and v3

Serviceguard NFS Toolkit A.11.31.07 Software and Patch Requirement

Serviceguard NFS modular package feature for HP-UX 11i v3 is supported on Serviceguard

A.11.18 or later versions for both VxFS (non-CFS) and Veritas Cluster File System (CFS). To

ensure that the NFS modular package feature functions properly with 11.18, install the following

patch on all servers to be configured as nodes of the cluster.

PHSS_39484 1.0 Serviceguard A.11.18.00

For more information about how to install NFS modular package, see the Serviceguard NFS Toolkit

A.11.11.06, A.11.23.05 and A.11.31.05 Administrator's Guide. To access this document, go to the

HP-UX Serviceguard manuals page at:

www.hp.com/go/hpux-serviceguard-docs. On this page, select HP Serviceguard NFS Toolkit.

The software required to install Serviceguard NFS Toolkit A.11.31.07 is, Veritas CFS in a CFS

environment. There is no patch required to install Veritas CFS. For detailed instructions on setting

up the Serviceguard product, see Managing Serviceguard Seventeenth Edition, July 2009. To access

this document, select HP Serviceguard on the HP-UX Serviceguard manuals page.

IMPORTANT: You cannot use Serviceguard NFS Toolkit without NFS Services.

Operating System Platform and Version Compatibility

Serviceguard NFS Toolkit version A.11.31.07 is supported both on Integrity Servers (also known

as the Itanium Product Family) and HP 9000 systems, with HP-UX 11i v3.

Disk and Memory Requirements

Installing Serviceguard NFS Toolkit requires 100 KB of disk space. Each configured package

requires an additional 100 KB of disk space.