Serviceguard NFS Toolkit A.11.31.02, A.11.11.06, and A.11.23.05 Administrator's Guide

Editing nfs.cntl for NFS Toolkit A.11.00.05, A.11.11.02 (or above) and A.11.23.01 (or above)
Starting with Serviceguard A.11.13, a package can have LVM volume groups, CVM
disk groups and VxVM disk groups.
Example steps:
1. Create a separateVG[n] variable for each LVM volume group that is used by the
package:
VG[0]=/dev/vg01 VG[1]=/dev/vg02 ...
2. Create a separate VXVM_DG[n] variable for each VxVM disk group that is used
by the package:
VXVM_DG[0]=dg01 VXVM_DG[1]=dg02 ...
3. Create a separate LV[n] and FS[n] variable for each volume group/disk group
and file system that will be mounted on the server:
For the LVM example, if this package uses the file systems pkg1a and pkg1b, which
are mounted on the logical volumes lvol1 and lvol2 with read and write options
enter:
LV[0]=/dev/vg01/lvol1; FS[0]=/pkg1a; FS_MOUNT_OPT[0]="-o rw"
LV[1]=/dev/vg01/lvol2; FS[1]=/pkg1b; FS_MOUNT_OPT[1]="-o rw"
For the VxVM example, if this package uses the file systems pkg1a and pkg1b,
which are mounted on the volumes lvol1 and lvol2 with read and write options
enter:
LV[0]="/dev/vx/dsk/dg01/vol01"; FS[0]="/pkg1a"; FS_MOUNT_OPT[0]="-o rw"
LV[1]="/dev/vx/dsk/dg01/vol02"; FS[1]="/pkg1b"; FS_MOUNT_OPT[1]="-o rw"
4. Specify the IP address for the package and the address of the subnet to which the
IP address belongs:
IP[0]=15.13.114.243 SUBNET[0]=15.13.112.0
The IP address you specify is the relocatable IP address for the package. NFS clients
that mount the file systems in the package will use this IP address to identify the
server. You should configure a name for this address in the DNS or NIS database,
or in the /etc/hosts file.
5. Serviceguard NFS Toolkit A.11.23.05 supports the new variable
HA_NFS_SCRIPT_EXTENSIONin the control script (nfs.cntl). This new variable
can be used to modify the name of the NFS specific control shell script (hanfs.sh)
that is associated with a package.
For example, if you set the HA_NFS_SCRIPT_EXTENSIONvariable to hapkg
orhapkg.sh, then the NFS specific control script executed by the package
Configuring a Serviceguard NFS Package 29