Serviceguard NFS Toolkit A.11.11.06 and A.11.23.05 Administrator's Guide

Installing and Configuring Serviceguard NFS
Configuring a Serviceguard NFS Package
Chapter 238
Copying the Template Files
If you will run only one Serviceguard NFS package in your Serviceguard
cluster, you do not have to copy the template files. However, if you will
run multiple Serviceguard NFS packages, each package must have its
own package configuration file and control script.
NOTE Serviceguard NFS Toolkit requires Serviceguard A.11.13 (or above). To
enable the File Lock Migration feature (available with 11i v1 and 11i v2),
you need Serviceguard A.11.15 or above.
To ensure that the File Lock Migration feature functions properly, install
HP-UX 11i v1 NFS General Release and Performance Patch,
PHNE_26388 (or a superseding patch). For HP-UX 11i v2, the feature
functions properly without a patch.
There is an additional NFS specific control script, hanfs.sh, which is
delivered along with the Serviceguard NFS Toolkit product. All of the
NFS specific functions and variables have been extracted from the
original Serviceguard package control script to this control script. You
must configure this control script, too.
For each Serviceguard NFS package, create a copy of the following
scripts with a unique name. For example:
cd /etc/cmcluster/nfs
cp nfs.conf nfs1.conf
cp nfs.conf nfs2.conf
cp nfs.cntl nfs1.cntl
cp nfs.cntl nfs2.cntl
cp hanfs.sh hanfs1.sh
cp hanfs.sh hanfs2.sh
cp nfs.flm nfs1.flm
cp nfs.flm nfs2.flm
NOTE The nfs.flm script is available on 11i v1 and 11i v2.
B5140-90030.book Page 38 Thursday, August 24, 2006 9:32 AM