Managing MC/ServiceGuard NFS A.11.11.03 and A.11.23.02 (March 2004)

Installing and Configuring MC/ServiceGuard NFS
Configuring an MC/ServiceGuard NFS Package
Chapter 234
Copying the Template Files
If you will run only one MC/ServiceGuard NFS package in your
MC/ServiceGuard cluster, you do not have to copy the template files.
However, if you will run multiple MC/ServiceGuard NFS packages, each
package must have its own package configuration file and control script.
NOTE MC/ServiceGuard NFS Toolkit requires MC/ServiceGuard A.11.13 (or
above). To enable the File Lock Migration feature (available with 11i v1
and 11i v2), you need MC/ServiceGuard A.11.15.
To ensure that the File Lock Migration feature functions properly, install
HP-UX 11i v1 NFS General Release and Performance Patch,
PHNE_26388 (or a superseding patch). For HP-UX 11i v2, the feature
functions properly without a patch.
There is an additional NFS specific control script, hanfs.sh, which is
delivered along with the MC/ServiceGuard NFS Toolkit product. All of
the NFS specific functions and variables have been extracted from the
original MC/ServiceGuard package control script to this control script.
You must configure this control script, too.
For each MC/ServiceGuard NFS package, create a copy of the following
scripts with a unique name. For example:
cd /etc/cmcluster/nfs
cp nfs.conf nfs1.conf
cp nfs.conf nfs2.conf
cp nfs.cntl nfs1.cntl
cp nfs.cntl nfs2.cntl
cp hanfs.sh hanfs1.sh
cp hanfs.sh hanfs2.sh
cp nfs.flm nfs1.flm
cp nfs.flm nfs2.flm
NOTE The nfs.flm script is available on 11i v1 and 11i v2.
B5140-90017.book Page 34 Thursday, January 22, 2004 3:10 PM