Managing HP Serviceguard A.11.20.00 for Linux, June 2012

extended resource. This parameter requires an operator and a value. The operators ==, !=,
>, <, >=, and <= are allowed. Values must be positive integer values ranging from 1 to
2147483647.
The following is an example of how to configure simple and extended resources.
Simple generic resource:
generic_resource_name sfm_disk
generic_resource_evaluation_type before_package_start
Extended generic resource:
generic_resource_name cpu_lan
generic_resource_evaluation_type during_package_start
generic_resource_up_criteria <50
For more information on the generic resource parameters, see “Package Parameter Explanations”
(page 158).
Configuring a Generic Resource
This section describes the step-by-step procedure to configure generic resources. You can also
configure generic resources from Serviceguard Manager. See the online help for instructions on
how to configure from Serviceguard Manager.
1. Create a package configuration file that contains the generic resource module:
cmmakepkg $SGCONF/pkg1/pkg1.conf
Package template is created.
This file must be edited before it can be used.
NOTE: To generate a configuration file adding the generic resource module to an existing
package (enter the command all on one line):
cmmakepkg -i $SGCONF/pkg1/pkg1.conf -m sg/generic_resource
2. Edit the package configuration file and specify the generic resource parameters (as shown in
the snippet):
service_name cpu_monitor
service_cmd $SGCONF/generic_resource_monitors/cpu_monitor.sh
service_halt_timeout 10
generic_resource_name sfm_cpu
generic_resource_evaluation_type during_package_start
Package Configuration Planning 97