Using Serviceguard Extension for RAC Version A.11.20 - (August 2011)

that uses the volume group must be halted. This procedure is described in the Managing
Serviceguard Eighteenth Edition user guide Appendix G.
• Initializing disks for CVM.
It is necessary to initialize the physical disks that will be employed in CVM disk groups.
If a physical disk has been previously used with LVM, you should use the pvremove
command to delete the LVM header data from all the disks in the volume group (this is
not necessary if you have not previously used the disk with LVM).
To initialize a disk for CVM, log on to the master node, then use the vxdiskadm program
to initialize multiple disks, or use the vxdisksetup command to initialize one disk at a
time, as in the following example:
# /etc/vx/bin/vxdisksetup -i c4t4d0
• Create the disk group for RAC.
Use the vxdg command to create disk groups. Use the -s option to specify shared mode,
as in the following example:
# vxdg -s init ops_dg c4t4d0
4. Creating volumes and adding a cluster filesystem.
# vxassist -g ops_dg make vol1 10240m
#vxassist -g ops_dg make vol2 10240m
# vxassist -g ops_dg make vol3 300m
5. View the configuration.
# cmviewcl
CLUSTER STATUS
ever3_cluster up
NODE STATUS STATE
ever3a up running
ever3b up running
MULTI_NODE_PACKAGES
PACKAGE STATUS STATE AUTO_RUN SYSTEM
SG-CFS-pkg up running enabled yes
54 Serviceguard Configuration for Oracle 10g, 11gR1, or 11gR2 RAC