Using Serviceguard Extension for RAC, 7th Edition, September 2008

PACKAGE STATUS STATE AUTO_RUN NODE
ops_pkg2 up running disabled ftsys10
Policy_Parameters:
POLICY_NAME CONFIGURED_VALUE
Start configured_node
Failback manual
Node_Switching_Parameters:
NODE_TYPE STATUS SWITCHING NAME
Primary up enabled ftsys10 (current)
Alternate up enabled ftsys9
Quorum Server Status
If the cluster is using a quorum server for tie-breaking services, the display shows the server
name, state and status following the entry for each node, as in the following excerpt from the
output of cmviewcl -v:
CLUSTER STATUS
example up
NODE STATUS STATE
ftsys9 up running
Quorum Server Status:
NAME STATUS STATE
lp-qs up running
...
NODE STATUS STATE
ftsys10 up running
Quorum Server Status:
NAME STATUS STATE
lp-qs up running
CVM Package Status
If the cluster is using the VERITAS Cluster Volume Manager for disk storage, the system
multi-node packageCVM-VxVM-pkg must be running on all active nodes for applications to be
able to access CVM disk groups. This package is shown in the following output of the cmviewcl
command:
CLUSTER STATUS
example up
NODE STATUS STATE
ftsys8 down halted
ftsys9 up running
SYSTEM_MULTI_NODE_PACKAGES:
PACKAGE STATUS STATE
VxVM-CVM-pkg up running
When you use the -v option, the display shows the system multi-node package associated with
each active node in the cluster, as in the following:
SYSTEM_MULTI_NODE_PACKAGES:
PACKAGE STATUS STATE
VxVM-CVM-pkg up running
NODE STATUS STATE
ftsys8 down halted
Reviewing Cluster and Package States with the cmviewcl Command 113