Using Serviceguard Extension for RAC, 6th Edition, April 2008

Package name “SG-CFS-MP-2” was generated to control the
resource. Mount point “/cfs/mnt2” was associated with the
cluster.
# cfsmntadm add cfsdg1 vol3 /cfs/mnt3 all=rw
The following output will be displayed:
Package name “SG-CFS-MP-3” was generated to control the
resource. Mount point “/cfs/mnt3” that was associated with
the cluster.
NOTE: The diskgroup and mount point multi-node packages (SG-CFS-DG_ID#
and SG-CFS-MP_ID#) do not monitor the health of the disk group and mount
point. They check that the application packages that depend on them have access
to the disk groups and mount points. If the dependent application package loses
access and cannot read and write to the disk, it will fail; however that will not
cause the DG or MP multi-node package to fail.
13. Mount Cluster Filesystem
# cfsmount /cfs/mnt1
# cfsmount /cfs/mnt2
# cfsmount /cfs/mnt3
14. Check CFS Mount Points
# bdf | grep cfs
/dev/vx/dsk/cfsdg1/vol1
10485760 19651 9811985 0% /cfs/mnt1
/dev/vx/dsk/cfsdg1/vol2
10485760 19651 9811985 0% /cfs/mnt2
/dev/vx/dsk/cfsdg1/vol3
307200 1802 286318 1% /cfs/mnt3
15. View the Configuration
# cmviewcl
CLUSTER STATUS
ever3_cluster up
NODE STATUS STATE GMS_STATE
ever3a up running unknown
ever3b up running unknown
MULTI_NODE_PACKAGES
PACKAGE STATUS STATE AUTO_RUN SYSTEM
SG-CFS-pkg up running enabled yes
SG-CFS-DG-1 up running enabled no
SG-CFS-MP-1 up running enabled no
Creating a Storage Infrastructure with CFS 71