Using Serviceguard Extension for RAC, 6th Edition, April 2008

# policies that can be configured in the cluster is 200.
#
# Example: to configure a role for user john from node noir to
# administer a cluster and all its packages, enter:
# USER_NAME john
# USER_HOST noir
# USER_ROLE FULL_ADMIN
# List of cluster aware LVM Volume Groups. These volume groups will
# be used by package applications via the vgchange -a e command.
# Neither CVM or VxVM Disk Groups should be used here.
# For example:
# VOLUME_GROUP /dev/vgdatabase
# VOLUME_GROUP /dev/vg02
# List of OPS Volume Groups.
# Formerly known as DLM Volume Groups, these volume groups
# will be used by OPS or RAC cluster applications via
# the vgchange -a s command. (Note: the name DLM_VOLUME_GROUP
# is also still supported for compatibility with earlier versions.)
# For example:
# OPS_VOLUME_GROUP /dev/vgdatabase
# OPS_VOLUME_GROUP /dev/vg02
Creating a Storage Infrastructure with CFS
In addition to configuring the cluster, you create the appropriate logical volume
infrastructure to provide access to data from different nodes. This is done with Logical
Volume Manager (LVM), Veritas Volume Manager (VxVM), or Veritas Cluster Volume
Manager (CVM). You can also use a mixture of volume types, depending on your
needs. LVM and VxVM configuration are done before cluster configuration, and CVM
configuration is done after cluster configuration.
This section has information about configuring a cluster that uses the Veritas cluster
file system (CFS) with Veritas Cluster Volume Manager (CVM) 4.1 or later. The next
section (“Creating a Storage Infrastructure with CVM” (page 117)) has information
about configuring the Veritas Cluster Volume Manager (CVM) with other filesystems,
not CFS.
For more information refer to your version of the Serviceguard Extension for RAC
Release Notes and HP Serviceguard Storage Management Suite Release Notes located
at http://docs.hp.com -> High Availability.
Creating a SGeRAC Cluster with CFS for Oracle 9i
The following software needs to be pre-installed in order to use this configuration:
If you are installing CFS 4.1 or 5.0 with either the Storage Management Suite (SMS)
bundle or Mission Critical Operating Environment (MCOE), use the appropriate product
number as described below:
• SGeRAC and CFS 4.1 are included with the HP Serviceguard SMS bundle or MCOE.
• SGeRAC and CFS 5.0 are included with the HP Serviceguard Storage Management
Suite bundle or MCOE.
Creating a Storage Infrastructure with CFS 111