Using Serviceguard Extension for RAC, 5th Edition, June 2007

Maintenance and Troubleshooting
Reviewing Cluster and Package States with the cmviewcl Command
Chapter 4208
Policy_Parameters:
POLICY_NAME CONFIGURED_VALUE
Start configured_node
Failback manual
Node_Switching_Parameters:
NODE_TYPE STATUS SWITCHING NAME
Primary up enabled ftsys9 (cur
rent)
NODE STATUS STATE
ftsys10 up running
Network_Parameters:
INTERFACE STATUS PATH NAME
PRIMARY up 28.1 lan0
STANDBY up 32.1 lan1
PACKAGE STATUS STATE AUTO_RUN NODE
ops_pkg2 up running disabled ftsys1
0
Policy_Parameters:
POLICY_NAME CONFIGURED_VALUE
Start configured_node
Failback manual
Node_Switching_Parameters:
NODE_TYPE STATUS SWITCHING NAME
Primary up enabled ftsys10 (cur
rent)
Alternate up enabled ftsys9
Quorum Server Status
If the cluster is using a quorum server for tie-breaking services, the
display shows the server name, state and status following the entry for
each node, as in the following excerpt from the output of cmviewcl -v:
CLUSTER STATUS
example up
NODE STATUS STATE
ftsys9 up running