Using Serviceguard Extension for RAC, 5th Edition, June 2007

Serviceguard Configuration for Oracle 9i RAC
Using Packages to Configure Startup and Shutdown of RAC Instances
Chapter 3192
First, generate a control script template:
# cmmakepkg -s /etc/cmcluster/pkg1/control.sh
You may customize the script, as described in the section, “Customizing
the Package Control Script.
Customizing the Package Control Script
Check the definitions and declarations at the beginning of the control
script using the information in the Package Configuration worksheet.
You need to customize as follows:
Update the PATH statement to reflect any required paths needed to
start your services.
If you are using LVM, enter the names of volume groups to be
activated using the VG[] array parameters, and select the
appropriate options for the storage activation command, including
options for mounting and unmounting filesystems, if desired. Do not
use the VXVM_DG[] or CVM_DG[] parameters for LVM volume groups.
If you are using CVM, enter the names of disk groups to be activated
using the CVM_DG[] array parameters, and select the appropriate
storage activation command, CVM_ACTIVATION_CMD. Do not use the
VG[] or VXVM_DG[] parameters for CVM disk groups.
If you are using VxVM disk groups without CVM, enter the names of
VxVM disk groups that will be imported using the VXVM_DG[] array
parameters. Enter one disk group per array element. Do not use the
CVM_DG[] or VG[] parameters for VxVM disk groups without CVM.
Also, do not specify an activation command.
Add the names of logical volumes and file systems that will be
mounted on them.
If you are using mirrored VxVM disks, specify the mirror recovery
option VXVOL.
Select the appropriate options for the storage activation command
(not applicable for basic VxVM disk groups), and also include options
for mounting and unmounting filesystems, if desired.
Specify the filesystem mount retry and unmount count options.
Define IP subnet and IP address pairs for your package.
Add service name(s).