Using Serviceguard Extension for RAC, 3rd Edition, May 2006

Serviceguard Configuration for Oracle 10g RAC
Creating a Storage Infrastructure with CFS
Chapter 2 69
Package name “SG-CFS-MP-1” was generated to control the
resource. Mount point “/cfs/mnt1” was associated with the
cluster.
# cfsmntadm add cfsdg1 vol2 /cfs/mnt2 all=rw
The following output will be displayed:
Package name “SG-CFS-MP-2” was generated to control the
resource. Mount point “/cfs/mnt2” was associated with the
cluster.
# cfsmntadm add cfsdg1 vol3 /cfs/mnt3 all=rw
The following output will be displayed:
Package name “SG-CFS-MP-3” was generated to control the
resource. Mount point “/cfs/mnt3” that was associated
with the cluster.
NOTE The diskgroup and mount point multi-node packages
(SG-CFS-DG_ID# and SG-CFS-MP_ID#) do not monitor the health of
the disk group and mount point. They check that the application
packages that depend on them have access to the disk groups and
mount points. If the dependent application package loses access and
cannot read and write to the disk, it will fail; however that will not
cause the DG or MP multi-node package to fail.
13. Mount Cluster Filesystem
# cfsmount /cfs/mnt1
# cfsmount /cfs/mnt2
# cfsmount /cfs/mnt3
14. Check CFS Mount Points
# bdf | grep cfs
/dev/vx/dsk/cfsdg1/vol1
10485760 19651 9811985 0% /cfs/mnt1
/dev/vx/dsk/cfsdg1/vol2
10485760 19651 9811985 0% /cfs/mnt2
/dev/vx/dsk/cfsdg1/vol3
307200 1802 286318 1% /cfs/mnt3