Using Serviceguard Extension for RAC, 3rd Edition, May 2006

Serviceguard Configuration for Oracle 9i RAC
Creating a Storage Infrastructure with CFS
Chapter 3130
NOTE CVM 4.1 does not require rootdg
2. Create the Cluster file:
# cd /etc/cmcluster
# cmquerycl -C clm.asc -n ever3a -n ever3b
Edit Cluster file
3. Create the Cluster
# cmapplyconf -C clm.asc
4. Start the Cluster
# cmruncl
# cmviewcl
The following output will be displayed:
CLUSTER STATUS
ever3_cluster up
NODE STATUS STATE
ever3a up running
ever3b up running
5. Configure the Cluster Volume Manager (CVM)
Configure the system multi-node package, SG-CFS-pkg, to configure
and start the CVM/CFS stack. Unlike VxVM-CVM-pkg, the
SG-CFS-pkg does not restrict heartbeat subnets to a single subnet
and supports multiple subnets.
# cfscluster config -s
The following output will be displayed:
CVM is now configured
Starting CVM...
It might take a few minutes to complete
When CVM starts up, it selects a master node, which is the node
from which you must issue the disk group configuration commands.
To determine the master node, issue the following command from
each node in the cluster: