Using Serviceguard Extension for RAC, 10th Edition, April 2013

DescriptionAttributes
Specify a single SERVICE_NAME, corresponding to the service definition in the
control script. This service invokes Toolkit script "toolkit_oc.sh check".
SERVICE_NAME
Default value is 300 seconds for a 4 node cluster. This value is suggested as an
initial value. It may need to be tuned for your environment.
SERVICE_HALT_TIMEOUT
For the ASMDG MNP:
NOTE: If ASM over SLVM is being used for RAC database, HP recommends that you use the
new ASM DG package to manage the ASM disk group.
DescriptionAttributes
Set to any name desired for the ASMDG MNP.PACKAGE_NAME
Set to MULTI_NODE.PACKAGE_TYPE
Comment out.FAILOVER_POLICY,
FAILBACK_POLICY
Specify the names for the nodes that the ASMDG MNP will run on.NODE_NAME
Set to YES or NO depending on whether the ASMDG MNP is to be started on cluster
join or on demand.
AUTO_RUN
Set by default to YES to allow cluster to switch LANs locally in the event of a failure.LOCAL_LAN_FAILOVER_ALLOWED
Set by default to NO.NODE_FAIL_FAST_ENABLED
Set to the package control script.RUN_SCRIPT, HALT_SCRIPT
Default value is 600 seconds for a 4 node cluster. This value is suggested as an initial
value. It may need to be tuned for your environment.
RUN_SCRIPT_TIMEOUT,
HALT_SCRIPT_TIMEOUT
Configure a dependency on the OC MNP. For example:DEPENDENCY_NAME,
DEPENDENCY_CONDITION,
DEPENDENCY_LOCATION
OC-MNP-nameDEPENDENCY_NAME
OC-MNP-PKG=UPDEPENDENCY_CONDITION
SAME_NODEDEPENDENCY_LOCATION
Specify a single SERVICE_NAME, corresponding to the service definition in the control
script. This service invokes Toolkit script "toolkit_asmdg.sh check".
SERVICE_NAME
Default value is 300 seconds for a 4 node cluster. This value is suggested as an initial
value. It may need to be tuned for your environment.
SERVICE_HALT_TIMEOUT
For the RAC MNP:
DescriptionAttributes
Set to any name desired for the RAC MNP.PACKAGE_NAME
Set to MULTI_NODE.PACKAGE_TYPE
Comment out.FAILOVER_POLICY,
FAILBACK_POLICY
Specify the names for the nodes that the RAC MNP will run on.NODE_NAME
Set to YES or NO depending on whether the RAC MNP is to be started on cluster
join or on demand.
AUTO_RUN
Set by default to YES to allow cluster to switch LANs locally in the event of a failure.LOCAL_LAN_FAILOVER_ALLOWED
84 Serviceguard Configuration for Oracle 10gR2, 11gR1, or 11gR2 RAC