Using Serviceguard Extension for RAC, 10th Edition, April 2013

DescriptionAttributes
vgchange_cmd, vg
• Set vgchange_cmd to vgchange -a s. When you use ASM over HP-UX raw
disks, ignore this step.
• Specify the name(s) of the Shared Volume Groups in vg[0], vg[1]... When using
ASM over HP-UX raw disks, ignore this step.
Default value is 600 seconds for a 4 node cluster. This value is suggested as an
initial value. You might need to tune it according to your environment
run_script_timeout,
halt_script_timeout
Set this parameter if you want to monitor the Oracle RAC interconnect network.cluster_interconnect_subnet
Set by default to racp_monitor, if multiple RAC MNPs are configured, need to set
different service_name for each RAC MNP.
service_name
Set by default to "$SGCONF/scripts/sgerac/erac_tk_rac.sh rac_check"service_cmd
Set by default to noneservice_restart
Set by default to noservice_fail_fast_enabled
Default value is 300service_halt_timeout
Configure a dependency on the OC MNP For example:dependency_name,
dependency_condition,
dependency_location
OC-MNP-nameDEPENDENCY_NAME
OC-MNP-PKG=UPDEPENDENCY_CONDITION
SAME_NODEDEPENDENCY_LOCATION
For the RAC MNP
DescriptionAttributes
Set to any name desired for the RAC MNP.package_name
Set by default to multi_node.package_type
Set by default to "SGeRAC Toolkit RAC Instance package"package_description
Specify the names for the nodes that the RAC MNP will run on.node_name
Set to yes or no depending on whether the RAC MNP is to be started on cluster
join or on demand.
auto_run
Set by default to yes to allow the cluster to switch LANs locally in the event of a
failure.
local_lan_failover_allowed
Set by default to no.node_fail_fast_enabled
Set by default to $SGRUN/log/$SG_PACKAGE.logscript_log_file
Set to the RAC MNP working directory. After the cmapplyconf command, the
RAC MNP configuration file rac_dbi.conf is created in this directory. If the
TKIT_DIR
rac_dbi.conf file already exists in the directory, all the configuration parameters
are overwritten, and the original rac_dbi.conf file is backed up in
rac_dbi.conf.
Set to the RAC MNP script files directory. The default value is the RAC MNP script
files installation directory: /opt/cmcluster/SGeRAC/toolkit/racp
TKIT_SCRIPT_DIR
These parameters can be set in the cmmakepkg command if the Toolkit
configuration file is given with -t option. Otherwise, set them based on the
ORACLE_HOME,
CHECK_INTERVAL...MAINTENANCE_FLAG
description in “Toolkit Configuration File Parameters” (page 73) to fit your Oracle
environment.
Using Serviceguard Packages to Synchronize with Oracle 10gR2/11gR1/11gR2 RAC 79