Using Serviceguard Extension for RAC, 10th Edition, April 2013

DescriptionAttributes
For the package using CFS
MP-MNP-nameDEPENDENCY_NAME
MP-MNP-PKG=UPDEPENDENCY_CONDITION
SAME_NODEDEPENDENCY_LOCATION
NOTE: For modular style CFS DG-MP package, as a dependency modular style CFS
DG-MP MNP must be mentioned in OC MNP configuration file.
For the ASMDG MNP:
NOTE: If ASM over SLVM is being used for the RAC database, it is recommended
to use the new ASMDG package to manage the ASM disk group.
For the ASMDG MNP:
NOTE: If ASM over SLVM is being used for the RAC database, HP recommends that you use the
new ASMDG package to manage the ASM disk group.
DescriptionAttributes
Set to any name desired for the ASMDG MNP.package_name
Set by default to multi_node.package_type
Set by default to "SGeRAC Toolkit Oracle ASMDG package.package_description
Specify the names for the nodes that the ASMDG MNP will run on.node_name
Set to yes or no depending on whether you need to start the ASMDG MNP on
cluster join or on demand.
auto_run
Set by default to yes to allow the cluster to switch LANs locally in the event of a
failure.
local_lan_failover_allowed
Set by default to no.node_fail_fast_enabled
Set by default to $SGRUN/log/$SG_PACKAGE.logscript_log_file
Set to the ASMDG MNP working directory. After the cmapplyconf command,
the ASMDG MNP configuration file asm_dg.conf is created in this directory. If
TKIT_DIR
The asm_dg.conf file already exists in the directory, all the configuration
parameters are overwritten, and the original asm_dg.conf file is backed up in
asm_dg.conf.old.
Set to the ASMDG MNP script files directory. The default value is the ASMDG
MNP script files installation directory:
/opt/cmcluster/SGeRAC/toolkit/asmp
TKIT_SCRIPT_DIR
These parameters can be set in the cmmakepkg command if the Toolkit
configuration file is given with -t option. Otherwise, set them based on the
ORACLE_HOME,
CHECK_INTERVAL...MAINTENANCE_FLAG
description in “Toolkit Configuration File Parameters” (page 73) to fit your Oracle
environment.
It is not required to set these values, the cmapplyconf command will automatically
set them during package configuration based on the setting in the OC MNP. Set
ORA_CRS_HOME, OC_TKIT_DIR
by default to <set by cmapplyconf>. Refer to “Toolkit Configuration File Parameters”
(page 73) for the descriptions.
78 Serviceguard Configuration for Oracle 10gR2, 11gR1, or 11gR2 RAC