Manualshelf

Sample Configuration with HP Serviceguard Extension for RAG and Oracle Real Application Clusters 11g release 2 using Cluster File System

ManualsBrandsHP ManualsSoftwareHP Serviceguard Extension for RAC (SGeRAC)
11121314151617181920
14
– /dev/dsk/c4t1d0 /dev/rdsk/c4t1d0
– /dev/dsk/c4t2d0 /dev/rdsk/c4t2d0
– /dev/dsk/c4t3d0 /dev/rdsk/c4t3d0
• Redundant link:
– /dev/dsk/c5t0d0
/dev/rdsk/c5t0d0
– /dev/dsk/c5t1d0
/dev/rdsk/c5t1d0
– /dev/dsk/c5t2d0
/dev/rdsk/c5t2d0
– /dev/dsk/c5t3d0
/dev/rdsk/c5t3d0
Cluster for CFS (ccia1 and ccia2)
Figure 4. Cluster for CFS
Sample configuration
The following sections describe the process for configuring Oracle RAC 11g R2 on CFS.
Assumptions for this sample configuration
1. Cluster hardware is configured.
2. HP-UX 11.31 1003 HAOE is installed.
3. HP Serviceguard Storage Management Suite A.03.00 (SG SMS A.03.00) is installed.
4. Same private interconnect is used for all inter-node traffic (SG, RAC, CSS, GAB/LLT).
5. There is one shared disk for CFS.