Sample Configuration with HP Serviceguard Extension for RAG and Oracle Real Application Clusters 11g release 2 using Cluster File System

13
Sample configuration prerequisites
In the sample configuration, the following prerequisites apply:
Software
HP-UX 11i v3 1003 High Availability Operating Environment (HAOE) or later
(Oracle RAC 11g R2 is not supported on HP-UX 11i v2)
Serviceguard version A.11.19 (SG A.11.19)
Serviceguard Extension for RAC version A.11.19 (SGeRAC A.11.19)
HP Serviceguard Management Suites (SG SMS) bundle A.03.00
Oracle Clusterware (OC) and Oracle Real Application Clusters (RAC) 11g release 2
The following patches should be installed from
http://itresourcecenter.hp.com/
PHSS_40794 (SG A.11.19 patch) or later
PHSS_40886 (SGeRAC A.11.19 patch) or later
PHSS_40228 (SG CFS A.11.19 patch) or later
Note: PHSS_40228 belongs to bundle 7 of SG SMS A.03.00.
See Oracle Grid Infrastructure Installation Guide 11gR2 for HP-UX at
http://download.oracle.com/docs/cd/E11882_01/install.112/e17211.pdf for information on other
required patches.
Server hardware requirement
One 2-node cluster for CVM/CFS
Network requirements
PublicEthernet with two redundant NICs for primary and standby
OC requires at least one and up to three IP addresses for Cluster SCAN.
OC requires one VIP address per node.
VIPs and SCAN IPs must be currently unused.
VIPs and SCAN IPs must be resolvable, preferably in DNS.
HA is provided by SG local LAN failover.
PrivateEthernet with redundant NICs for primary and standby
All private cluster communications flow through the private network.
HA is provided by SG local LAN failover.
Private IP address and private network name must be configured in /etc/hosts file on each node.
Storage requirements
Each node has internal storage for OC and RAC binaries. OC Home requires 5 GB disk space, and
Oracle RAC Database binary requires 8.2 GB of disk space. In addition, 1 GB of disk space is
required for a
/tmp directory.
Shared storage:
Primary link:
/dev/dsk/c4t0d0 /dev/rdsk/c4t0d0