HP Extended Cluster for RAC Continuous availability with the flexibility of virtualization

traffic could be separated from other TCP/IP and Fibre Channel traffic. Moreover, adding Ethernet
and Fibre Channel I/O cards to the servers better distributed the I/O loads and resulted in increased
performance.
A thorough evaluation of the application transactions is recommended in conjunction with an analysis
of the following:
• Optimum buffer credit configuration
• Number of Ethernet cards in each server
• Number of Fibre Channel cards in each server
• Number of I/O slots and cards in the DWDM device
The next steps
A variety of performance enhancements at various levels within the Extended Cluster for RAC
architectural solution are available, such as network buffering, workload distribution, and database
partitioning. In many cases, these enhancements will be environment-specific. As these solutions are
deployed, a collection of best practices will be shared.
To provide additional business value, HP is continually investing in the development of new solutions
and further enhancing existing portfolios. An example of this commitment is the future capability to
handle numbers of nodes even higher than the current specifications.
Solution flexibility
The Extended Cluster for RAC solution was tested using the components detailed earlier in the “Test
architecture” section. However, the configuration is quite accommodating in the choice of acceptable
hardware and software. This flexibility enables customers to leverage existing IT assets and rapidly
move toward an operational implementation without the unnecessary purchase of a completely new
infrastructure.
During the testing period, a wide range of storage devices was introduced into the configuration. The
majority of HP-UX enterprise server-compatible storage devices will perform suitably in the Extended
Cluster for RAC environment, from the high-end HP StorageWorks XP disk array models to the lower-
cost HP EVA storage solution.
In addition, HP Serviceguard Quorum Server can be introduced to provide cluster lock management
for tie-breaking and autonomous clustering, following any failure that impacts cluster integrity.
There are a variety of options for load balancing using access clients, including Resonate’s Central
Dispatch product and a selection of hardware-based choices from Cisco.
Given the transparency of the DWDM devices, it is possible to run a wide variety of protocols across
the fiber. During testing, Gigabit Ethernet was used for system-to-system connectivity. Network
switches can be 100Base-T (TX or FX), 1000Base-T (TX or FX), or Fiber Distributed Data Interface
(FDDI). The connections between the network switches and the DWDM boxes must currently remain
fiber optic.
As demonstrated by the Oracle9i RAC implementation, HP has introduced the VSE, enhanced for
specific application server and database environments. HP released the VSE Reference Architecture
for BEA WebLogic Server and Oracle databases on HP-UX, which provides the most effective way for
customers to quickly implement virtualization within their application server and database
environments to achieve the benefits of an Adaptive Enterprise.
12