Safety and Regulatory Information, Fourth Edition - HP rp5400 Family of Servers

4 English
Electrostatic Discharge (ESD) Precautions
When handling any electronic component or assembly (such as, a PCI card or Memory SIMM), you
must observe the following antistatic precautions to prevent damage. An ESD kit (HP P/N
A3024-80004) is available (or supplied with Memory additions). This kit contains one wrist strap, one
conductive sheet, and one anti-static foam pad.
• Always wear a grounded wrist strap when working around the system, and when handling printed
circuit boards.
• Treat all assemblies, components and interface connections as static-sensitive.
• Avoid working in carpeted areas, and keep body movement to a minimum while removing or
installing boards, to minimize buildup of static charge.
Battery Notice
This product contains a Lithium battery.
This battery is not to be removed or replaced by the user. If the battery needs to be replaced, contact your
Hewlett-Packard authorized service personnel.
CAUTION Lithium batteries may explode if mistreated.
Do not recharge, disassemble, or dispose of in a fire.
Please properly recycle all used batteries.