Carrier Grade Addendum - rp5400 Series of Servers

Chapter 2
Removal and Replace Procedures
Introduction
30
Introduction
This chapter contains removal and replacement procedures for the hotswap DC power supply. For Removal
and replacement procedures for other rp5400 Series of Servers components, see the Remove and Replace
Procedures document at the URL http://docs.hp.com under the rp5400 Series of Servers topic.
Electrostatic Discharge (ESD) Precautions
When handling any electronic component or assembly (such as a PCI card or Memory SIMM), you must
observe the following antistatic precautions to prevent damage. An ESD kit (HP P/N A3024-80004) is
available (or supplied with Memory additions). The kit contains one wrist strap, one conductive sheet, and
one anti-static foam pad.
• Always wear a grounded wrist strap when working around printed circuit boards,
• Treat all assemblies, components, and interface connections as static-sensitive,
• Avoid working in carpeted areas, and
• Keep body movement to a minimum while removing or installing boards to minimize the buildup of static
charge.