Carrier Grade Addendum - rp5400 Series of Servers

Chapter 1
Installation
Connecting the Server to DC Power Source
25
Figure 1-10 Attaching the Cable Strain Relief bar
6. Connect the end of the cable to your DC power source.
NOTE The individual wires in the cable are labeled for power and ground leads.
7. Connect the short cable from each DC power supply to the connector on the slide tray directly below the
power supply and latch the connector in place.
Figure 1-11 Connecting the Power Supply to the Slide Tray Connectors
Latch Lock Direction
Slide Latch