Carrier Grade Addendum - rp5400 Series of Servers

Chapter 1

Installation

Installation Tasks

Step 1. Prepare the Site

Refer to the rp5400 Series of Servers Site Preparation information for general information on site

preparation.

Information on AC power requirements listed in the rp5400 Series of Servers Site Preparation

information does not apply to this product.

NOTE For NEBS compliance, the server must be installed in a NEBS certified rack.

Step 2. Receive and Unpack the Server

Refer to the rp5400 Series of Servers Unpack and Install Instructions.

Step 3. Install the Server in a Standalone enclosure

See “Installing the Server in a Rack.”

Step 4. Install Internal Server Components

Refer to the rp5400 Series of Servers Unpack and Install Instructions and Installing Add-On

Components documents for installation instructions for internal server components.

NOTE Some internal components are too delicate to be installed in the server prior to shipping.

These internal components are shipped with the server, but are packed separately. They can

be installed after the enclosure has been unpacked and positioned.

Some of the internal components that are packed separately are not user-installable. To

maintain warranty validation, these items must be installed by a Hewlett-Packard Customer

Engineer. If you received Central Processing Units (CPUs), contact your Hewlett-Packard

provider to arrange for installation.