User Service Guide, Fifth Edition - HP 9000 rp4410/4440

Figure 3-2 HP 9000 rp4410 and rp4440 Servers with Bezel Removed (Front View)
Figure 3-3 HP 9000 rp4410 and rp4440 Servers (Rear View)
Detailed Server Description
The following sections list information on the main subsystems within the HP 9000 rp4410 and
rp4440 servers.
I/O Subsystem
The following is supported on the HP 9000 rp4410 and rp4440 servers:
• PCI-X slots available - 8.
— Two dedicated PCI slots: Slot 1 is for SCSI; slot 2 is for LAN.
— Four hot-pluggable PCI-X 66 MHz 64-bit 3.3V 25W slots with shared busses and I/O.
Slots 3 and 4 share capabilities and slots 5 and 6 share capabilities.
— Two hot-pluggable PCI-X 133 MHz 64-bit 3.3V 15W slots dedicated for core I/O.
• I/O bandwidth - 4 GBs.
• Pinnacle FXe PCI video card.
• PCI Gigabit, Fast Ethernet Controller with Wake-on-LAN enabled/disabled with BIOS setup.
Internal Core I/O
The following is supported on the HP 9000 rp4410 and rp4440 servers:
• Dual channel SCSI U320 or U160 (PA8800 only) interface or RAID, two internal 68-pin
connectors, two 68-pin external connectors.
• SCSI backplane configured as either one or two channels.
52 Installing the System