User Service Guide, Fifth Edition - HP 9000 rp4410/4440

3 Installing the System
This chapter provides information on how to install the system.
Introduction
The HP 9000 rp4410 and rp4440 servers are 1P/1C, 1P/2C, 2P/2C, 3P/2C, or 4P/2C servers based
on the PA-RISC processor family architecture. The server accommodates up to 32 DIMMs and
internal peripherals including hard disks and a DVD drive. Its high availability features include
hot-swappable fans, hot-swappable power supplies, hot-pluggable disk drives, and hot-pluggable
PCI-X cards. The supported operating system is HP-UX 11i v1 (and higher HP-UX versions that
support PA-RISC systems).
Server Views
Figure 3-1, Figure 3-2, and Figure 3-3 show the top, front, and rear views of the HP 9000 rp4410
and rp4440 servers.
Figure 3-1 HP 9000 rp4410 and rp4440 Servers (Top View)
Introduction 51