User Service Guide, Fifth Edition - HP 9000 rp4410/4440

Table 1-4 Power Supply Status LED (continued)
StatusFail LED (Amber)Predict Fail LED
(Amber)
Power LED
(Green)
PSU dc outputs are on and OK.OffOffOn
Power supply failure.OnOffOff
Predictive failure. The PSU is about to fail because of a poorly
performing fan.
OffBlinkingOn
Current limit on 48 VDC output.BlinkingOffOn
iLO MP LAN LEDs
NOTE: There are two different iLO MP cards that were installed in this server. They have
different LEDs on them. Both of them are shown below.
One of the iLO MP LAN cards has the amber LED on the left and the green LED on the right. It
is shown in Figure 1-9. The internal iLO MP LAN uses an RJ-45 type connector. This connector
has two LEDs (LAN link and LAN activity) that signal status and activity.
Figure 1-9 iLO MP LAN LEDs – Example 1
Table 1-5 provides iLO MP LED status descriptions.
Table 1-5 iLO MP LED Status Descriptions – Example 1
StatusConditionLED
Linked at 100 MBs. No activity.On100 M amber
Linked at 100 MBs. Activity present.Blinking100 M amber
Linked at 10 MBs. No activity.On10 M green
Linked at 10 MBs. Activity present.Blinking10 M green
The other iLO MP LAN card has the green LED on the left and the amber LED on the right. Is is
shown in Figure 1-10.
30 Overview