User Service Guide, Fifth Edition - HP 9000 rp4410/4440

• Three DB-9 ports (console, UPS, and modem)
• Optional dual channel U320 RAID controller, two 68-pin external connectors (replaces SCSI
interface)
Processors
The following is supported on the HP 9000 rp4410 and rp4440 servers:
• 800 MHz/1.5 GB cache or 1 GHz/1.5 GB cache per CPU
• Both processors are available with 32 MB or 64 MB L2 cache per dual processor module
• HP 9000 rp4410 server can have one processor or both processors of a single dual processor
module enabled, or two processors enabled in each of two dual processor modules
• HP 9000 rp4440 server can be 1P/2C, 2P/2C, 3P/2C, or 4P/2C
Memory
The following is supported on the HP 9000 rp4410 and rp4440 servers:
• 16 DIMM slots on standard memory extender board
• 32 DIMM slots on optional memory extender board
• Maximum memory size of 128 GB (4 GB DIMMs on 32-slot memory extender board)
• Supports up to 32 Double Data Rate (DDR) registered ECC memory, in PC2100 DIMMs
• Supported DDR DIMM sizes:
— 128 MB, 256 MB, 512 MB, 1 GB, 2 GB, and 4 GB
— Standard 184 pins 2.5V DDR266, CL2, registered, ECC
• 133 MHz memory bus frequency, 266 MTransfers/s data, 8.5 GB/s peak data bandwidth
• DIMMs loaded by quads enable interleaved mode and chip spare
• Requires that DIMMs within each group of four (quad) be identical
Cooling
Six cooling fans with N+1 redundancy.
Power Supply Unit
The following is supported on the HP 9000 rp4410 and rp4440 servers:
• One 1200 W hot-swappable power supply
• Optional second 1200 W hot-swappable power supply for N+1 redundancy
Front Display Panel, DVD, and Diagnostic Panel
The following is supported on the HP 9000 rp4410 and rp4440 servers:
• Front panel that provides the controls and indicators commonly used for operation
• DVD+RW drive (with CD-write capability); IDE interface; 48x speed
• Optional slimline DVD drive
• Power button and LED indicators for system status
• LED-based diagnostic panel
Mass Storage
The following is supported on the HP 9000 rp4410 and rp4440 servers:
• Up to two SCSI hot-pluggable hard disk drives
• Integrated Ultra-3 SCSI dual channel controller; 80 MB/s transfer rate with two 68-pin
connectors. The SCSI backplane is configured as either one or two channels
24 Overview