User Service Guide, Fifth Edition - HP 9000 rp4410/4440

Figure 1-3 HP 9000 rp4410/rp4440 Server (Rear View)
Detailed Server Description
The following sections list information on the main subsystems within the HP 9000 rp4410 and
rp4440 servers.
I/O Subsystem
The following is supported on the HP 9000 rp4410 and rp4440 servers:
• PCI-X slots available - 8
— Two dedicated PCI slots: Slot 1 is for SCSI; slot 2 is for LAN
— Four hot-pluggable PCI-X 66 MHz 64-bit 3.3V 25W slots with shared busses and I/O.
Slots 3 and 4 share capabilities and slots 5 and 6 share capabilities
— Two hot-pluggable PCI-X 133 MHz 64-bit 3.3V 15W slots dedicated for core I/O
• I/O bandwidth - 4 GBs
• Pinnacle FXe PCI video card
• PCI Gigabit, Fast Ethernet Controller with Wake-on-LAN enabled/disabled with BIOS setup
Internal Core I/O
The following is supported on the HP 9000 rp4410 and rp4440 servers:
• Dual channel SCSI U320 or U160 (PA8800 only) interface or RAID, two internal 68-pin
connectors, two 68-pin external connectors
• SCSI backplane configured as either one or two channels
• One internal Integrated Drive Electronics (IDE) connector for a slimline optical device (CD
and DVD)
• No floppy connector
• Optional dual channel U320 RAID controller, two internal 68-pin connectors, two 68-pin
external connectors (replaces SCSI interface)
External Core I/O
The following is supported on the HP 9000 rp4410 and rp4440 servers:
• Three external serial ports
• Two external USB ports
• Two SCSI U320 or U160 68-pin connectors (U160 for PA8800 only)
• One or two 10/100/1000Base-T ethernet LAN connectors for copper cable
• Two USB 2.0 ports
Detailed Server Description 23