User Service Guide, Fifth Edition - HP 9000 rp4410/4440

10. Carefully remove the dual processor module from the processor socket. If protective pin
covers are available, install the cover on the processor connectors to shield the connector
pins. Place the dual processor module in an antistatic container.
Figure 6-14 Removing the Dual Processor Module from the Processor Extender Board
Installing a Dual Processor Module
NOTE: Before installing a dual processor module into your system, read the following
instructions carefully and see Figure 6-18.
To install a dual processor module on the processor extender board, follow these steps:
Replacing Dual Processor Modules 167