User Service Guide, Fifth Edition - HP 9000 rp4410/4440

1 One DIMM filler board covers two adjacent DIMM connectors.
Figure 6-8 16-DIMM Memory Extender Board Slot IDs
An optional 32-DIMM memory extender board is available to replace the 16-DIMM memory
extender board. This extender board must contain a minimum of one GB of memory [four 256
MB DIMMs loaded in quad 0 (connectors 0A, 0B, 0C, and 0D)].
Table 6-2 and Figure 6-9 show the filler requirements and slot IDs for the 32-DIMM memory
extender board.
Table 6-2 DIMM Filler Requirements for 32-DIMM Memory Extender Board
Fillers required
1
DIMMs Loaded
12 fillers total: Two fillers in quads 1, 3, 4, 5, 6, and 7 (quad
2 remains unfilled)
4 DIMMs in quad 0
Eight fillers total: Two fillers in quads 4, 5, 6, and 7 (quads
2 and 3 remain unfilled)
8 DIMMs in quads 0 and 1
Eight fillers total: Two fillers in quads 4, 5, 6, and 7 (quad
3 remains unfilled)
12 DIMMs in quads 0, 1, and 2
Eight fillers total: Two fillers in quads 4, 5, 6, and 7 (all
quads filled)
16 DIMMs in quads 0, 1, 2, and 3
Four fillers total: Two fillers in quads 5 and 7 quad 6
remains unfilled
20 DIMMs in quads 0, 1, 2, 3, and 4
No fillers required24 DIMMs in quads 0, 1, 2, 3, 4, and 5
No fillers required28 DIMMs in quads 0, 1, 2, 3, 4, 5, and 6
No fillers required32 DIMMs in quads 0, 1, 2, 3, 4, 5, 6, and 7
1 One DIMM filler board covers two adjacent DIMM connectors.
158 Removing and Replacing Components