User Service Guide, Fifth Edition - HP 9000 rp4410/4440

Accessing a Pedestal-Mounted Server
The HP 9000 rp4410 and rp4440 servers are also designed for use in a stand-alone pedestal
(rackless) environment. A pedestal is available for use with the server in a floor- or pedestal-mount
configuration.
You do not need to remove the pedestal from the server to gain access to internal components.
The front bezel, front cover, and top cover can be removed with the pedestal attached to the
server.
WARNING! Ensure that the server is properly grounded when performing remove-and-replace
procedures. Use an antistatic wrist strap and grounding mat similar to those found in the HP
Electrically Conductive Field Service Kit.
Figure 6-2 Pedestal-Mounted Server
Front Bezel
The server does not need to be powered off to remove the front bezel. The front control panel
access door is on the bezel.
Opening the control panel door provides access to the following components:
• Power button
• System LEDs
Accessing a Pedestal-Mounted Server 151