User Service Guide, Fifth Edition - HP 9000 rp4410/4440

Table 5-9 lists the extended core I/O paths for the core I/O slot.
Table 5-9 Extended Core I/O Paths
PathsLocationFunction Associated with Path
0/0/1/0Rear-panel bulkhead connector (labeled MP local and
auxiliary)
RS-232 connector port
(communications controller)
0/0/1/1Rear-panel bulkhead connector (labeled remote)MP local and remote ports (serial
controller)
0/1/1/1.x.yRear-panel SCSI connector (upper connector)Ultra 3 (U160/320) external SCSI
port
0/0/2/0Upper rear-panel bulkhead connector (labeled USB1)USB port
0/0/2/1Lower rear-panel bulkhead connector (labeled USB2)USB port
0/0/3/0On I/O baseboardIDE controller
0/0/4/0Rear-panel bulkhead connector (labeled VGA)VGA controller
Table 5-10 lists the PCI I/O paths.
Table 5-10 PCI I/O Paths
ACPI PathsLocationFunction Associated with
Path
Slot
0/1/1/0 Channel A
0/1/1/1 Channel B
Left-most slot (nearest to
center of baseboard)
Ultra 160/320 dual SCSI
channel
Slot 1 (core I/O SCSI)
0/1/2
0/1/2/1 (dual-port LAN only)
2nd from leftGigabit LANSlot 2 (core I/O LAN)
0/4/13rd from leftI/O with 66 MHz/ 64-bit
PCI-X card (shared with
slot 4)
Slot 3
0/4/24th from leftI/O with 66 MHz/ 64-bit
PCI-X card (shared with
slot 3)
Slot 4
0/5/15th from leftI/O with 66 MHz/ 64-bit
PCI-X card (shared with
slot 6)
Slot 5
0/5/26th from leftI/O with 66 MHz/ 64-bit
PCI-X card (shared with
slot 5)
Slot 6
0/2/17th from leftI/O with 133 MHz/
64-bit PCI-X card
Slot 7
0/6/1Right-most slot (nearest to
edge of baseboard)
I/O with 133 MHz/
64-bit PCI-X card
Slot 8 (right)
Core I/O Connections
The HP 9000 rp4410 and rp4440 servers include the following core I/O connections:
• Two USB ports
• One iLO MP
— One 10/100 LAN-RJ45
— Three serial ports
Core I/O Connections 145