Installation Guide, Sixth Edition - HP 9000 rp4410/rp4440

10
Publishing History
Table 1 lists the publishing history details for this document.
Document Organization
This guide is divided into the following sections.
Section 1 Introduction: Provides views and descriptions of the server and safety information.
Section 2 Unpacking and Inspecting the Server: Provides procedures to perform before installing
the server.
Section 3 Installing Additional Components: Describes how to install server components that are
not installed before delivery.
Section 4 Installing the Server into a Rack: Describes how to install the server into an HP rack,
non-HP rack, or pedestal.
Section 5 Connecting Cables: Describes the cables to connect to power the server and to provide
LAN connectivity.
Section 6 Console Setup: Describes how to set up and start a console session on the server.
Section 7 Accessing a Host Console: Describes the different ways to access the host console.
Section 8 Powering On the Server: Provides instructions on how to power on the server.
Section 9 Booting the Operating System: Provides instructions on how to boot the operating
system.
Section 10 Troubleshooting: Provides diagnostics and basic troubleshooting information.
Typographic Conventions
This document uses the following conventions.
WARNING A warning lists requirements that you must meet to avoid personal injury.
CAUTION A caution provides information required to avoid losing data or avoid losing system
functionality.
Table 1 Publishing History Details
Document
Manufacturing
Part Number
Operating Systems
Supported
Supported Product Versions Publication Date
A9950-96010 HP-UX 11i v1
HP-UX 11i v2
HP-UX 11i v3
HP 9000 rp4410 and rp4440 April 2007
A9950-96005 HP-UX 11i v1 HP 9000 rp4410 and rp4440 April 2005
N/A HP-UX 11i v1 HP 9000 rp4410 and rp4440 July 2003