Secure Path v2.0 for Sun Solaris Installation and Reference Guide

5-6 StorageWorks Secure Path Version 2.0 for Sun Solaris
Compaq Confidential – Need to Know Required
Writer: Cyndi Vaccaro Project: StorageWorks Secure Path Version 2.0 for Sun Solaris Comments:
Part Number: AA-RKYDA-TE File Name: f-ch 5 Managing Secure Path .doc Last Saved On: 12/21/99 4:08 PM
(for example, fcaw0). You can obtain this value from the HBA field
in the table generated by spmt display.
Example:
# spmt remove -a fcaw1
spmt reconfig
The spmt reconfig command restores the host bus adapter path that was
removed from the Secure Path configuration by the spmt remove command.
The spmt reconfig
does not restore path usage to PREFERRED_PATH.
You must use the spmt restore
command to re-establish
PREFERRED_PATH usage.
The spmt reconfig
command has the form:
# spmt reconfig -a hba
where:
hba
refers to the instance of the Solaris host bus adapter
Example:
# spmt reconfig – a fcaw1
Secure Path daemon tool (spinit)
spinit
The spinit utility to start and stop the Secure Path spdaemon.
The spinit utility has the form:
# spinit start [email_address]
# spinit stop
where:
start
starts the spdaemon
stop stops the spdaemon
email_address specifies where to send mail when an event takes
place that may require action. The default is the root account on the
server.