Secure Path v2.0 for Sun Solaris Installation and Reference Guide

5-4 StorageWorks Secure Path Version 2.0 for Sun Solaris

Compaq Confidential – Need to Know Required

Writer: Cyndi Vaccaro Project: StorageWorks Secure Path Version 2.0 for Sun Solaris Comments:

Part Number: AA-RKYDA-TE File Name: f-ch 5 Managing Secure Path .doc Last Saved On: 12/21/99 4:08 PM

spmt cli

The spmt cli command invokes a CLI session with a RAID controller. spmt

opens a session with the RAID controller on the active path of the specified

Secure Path device.

The spmt cli command has the form:

# spmt cli -t target_number

where:

Default = open the cli to the first online path

target_number = the Secure Path target assigned to the storage unit

Example:

# spmt cli -t 2

HSG80>

NOTE: To end the CLI session, type q

WARNING: This CLI session does not support the run command for the

controller utilities.

spmt toggle

The spmt toggle command changes the path that a Secure

Path device uses to access a LUN. The online path becomes

the standby path, the standby path becomes the online path.

Use this command to manually distribute LUN access across

different paths, for better performance.

NOTE: In a multi-host environment, toggle will only move LUNs that are currently