Secure Path v2.0 for Sun Solaris Installation and Reference Guide

Installing Secure Path Software 4-5
Compaq Confidential – Need to Know Required
Writer: Cyndi Vaccaro Project: StorageWorks Secure Path Version 2.0 for Sun Solaris Comments:
Part Number: AA-RKYDA-TE File Name: e-ch4 Installing Secure Path Software.doc Last Saved On: 12/21/99 5:18 PM
Example:
LUN ID: 6000-1FE1-0000-8920-0009-9030-5234-006E
4. On the server, in the /kernel/drv directory, edit the following three
files as described:
a. mda.conf – add two new path entries to the host Target. (Chapter 6
explains the path entries).
Example:
name="mda" parent= "/
sbus@3,0/fcaw@0,0" target=64 lun=18;
name="mda" parent= "
/sbus@b,0/fcaw@0,0" target=64 lun=18;
b. ldLite.conf – add the new LUN ID, recorded in Step 3.
Example:
targ18-devName = "6000-1FE1-000-0D40-0090-8090-0656-0123";
c. sd.conf – verify that an entry exists to map to the new entry added to
the mda.conf file. Thus, if there are now 18 Target/LUN
combinations, an entry in sd.conf must be added to map that Target.
Example:
name="sd" class = "scsi" target = 18, lun=0;
5. Reboot the server, by entering:
# reboot -- -r
6. Verify that the server has acquired the new UNIT. Enter:
# format