HP StorageWorks Secure Path V3.0C for Linux and Linux Workgroup Edition Installation and Reference Guide (AA-RU7VD-TE, February 2004)

Removing/Upgrading Secure Path
98 Secure Path v3.0C for Linux and Linux Workgroup Edition Installation and Reference Guide
Updating the software
This update procedure addresses both Secure Path v3.0C for Linux and Secure
Path v3.0C for Linux Workgroup Edition. The Secure Path v3.0C for Linux
update kit is available on the HP web site at
http://h18000.www1.hp.com/produ cts/s anw orks/s ecure-path/inde x.html
Use the following steps to update Secure Path:
1. Ensure that the Secure Path v3.0C top level directory includes:
■ Readme file
■ ./update_SPlinuxFull.sh and
./update_SPlinuxwkgrp.sh
■ rpm files reside in RPM directory
2. Choose the appropriate command to update Secure Path:
■ For Secure Path v3.0C, enter:
./update_SPlinuxFull.sh
■ For Secure Path v3.0C Workgroup Edition, enter:
./update_SPlinuxwkgrp.sh
Note: Do not use rpm -Uvh to update the software. The installation will fail.
The following example shows update instructions and message displays from the
update installer:
Example:
Welcome to the Secure Path Linux 3.0C update installer.
============================================================
IMPORTANT: You must have a valid copy of the
Secure-Path-3.0-8.0.noarch.rpm or
Secure-Path-3.0AFull-4.0.noarch.rpm or
Secure-Path-3.0BFull-5.0.noarch.rpm
Secure-Path-3.0BFull64-4.0.noarch.rpm or
Secure-Path-3.0BFullUL64-4.0.noarch.rpm in the
/tmp/securepathRPM directory to validate the update!!!
============================================================