HP StorageWorks Secure Path V3.0C for Linux and Linux Workgroup Edition Installation and Reference Guide (AA-RU7VD-TE, February 2004)

Removing/Upgrading Secure Path
97Secure Path v3.0C for Linux and Linux Workgroup Edition Installation and Reference Guide
Table 11 lists the update RPMs for 64-bit systems in this release of Secure Path:
Note: For SUSE/United Linux rpms, the rpm name has changed from FullSuse64 to
FullUL64.
Note: Because there is no commercial update process at this time for updating Red
Hat Enterprise Linux 2.1 to Red Hat Enterprise Linux 3.0, or for updating
SUSE LINUX 7/UnitedLinux 1.0 to SUSE LINUX 8/UnitedLinux 1.0, you must follow
the update procedures described in either “32-bit systems” on page 96 or
“64-bit systems” on page 96.
■ Updating these systems requires a complete installation, which wipes out
everything on the hard disk.
■ If a previous version of Secure Path is installed, the update solution saves all
configuration files and then updates the Secure Path software to v3.0C.
Table 11: Secure Path v3.0C 64-bit update RPMs
For this
operating
system:
To update this RPM: Use:
Red Hat Secure-Path-3.0BFull64-4.0.noarch.rpm Secure-Path-3.0CFull64Update
Red Hat Secure-Path-3.0Bc64-4.0.noarch.rpm Secure-Path-3.0Cwkgrp64
Update
SUSE/
UnitedLinux
Secure-Path-3.0BFullSuse64-4.0.noarch.rpm Secure-Path-3.0CFullUL64
Update
SUSE/
UnitedLinux
Secure-Path-3.0BcSuse64-4.0.noarch.rpm Secure-Path-3.0CwkgrpUL64
Update