HP StorageWorks Secure Path V3.0C for Linux and Linux Workgroup Edition Installation and Reference Guide (AA-RU7VD-TE, February 2004)

Removing/Upgrading Secure Path
96 Secure Path v3.0C for Linux and Linux Workgroup Edition Installation and Reference Guide
Updating to Secure Path for Linux v3.0C
The following sections describe the update rpms and requirements for 32-bit or
64-bit operating systems.
32-bit systems
The system is not required to have previous versions of Secure Path (v3.0, v3.0A,
or v3.0B) installed for the update to succeed. However, Secure Path v3.0, v3.0A,
or v3.0B RPM must be located in the /tmp/securepathRPM directory so the
update can be validated.
To update from Secure Path v3.0, v3.0A, or v3.0B to Secure Path v3.0C, ensure
that you have the following in the /tmp/securepathRPM directory:
64-bit systems
If you are updating from Secure Path v3.0B (for Linux or Linux Workgroup) to
Secure Path v3.0C (for Linux or Linux Workgroup), you can access the update kit
at the following web site:
http://h18000.www1.hp.com/produ cts/s anw orks/s ecure-path/inde x.html .
The system is not required to have Secure Path v3.0B, installed for the update to
succeed. However, the Secure Path v3.0C RPM must be located in the
/tmp/securepathRPM directory so the update can be validated.
Table 10: Secure Path v3.0C 32-bit update RPMs
For this Secure Path version: Use:
Secure-Path-3.0BFull-5.0.noarch.rpm Secure-Path-3.0CFullUpdate
Secure-Path-3.0Bc-5.0.noarch.rpm Secure-Path-3.0CwkgrpUpdate
Secure-Path-3.0AFull-4.0.noarch.rpm Secure-Path-3.0CFullUpdate
Secure-Path-3.0Ac-4.0.noarch.rpm Secure-Path-3.0CwkgrpUpdate
Secure-Path-3.0-8.0.noarch.rpm Secure-Path-3.0CFullUpdate
Secure-Path-3.0c-8.0.noarch.rpm Secure-Path-3.0CwkgrpUpdate