HP StorageWorks Secure Path V3.0C for Linux and Linux Workgroup Edition Installation and Reference Guide (AA-RU7VD-TE, February 2004)

Managing Secure Path
72 Secure Path v3.0C for Linux and Linux Workgroup Edition Installation and Reference Guide
HBAs: 2300-2 2300-4
Item Device Controller HBA Instance
= = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =
0 spa ZG10506937 2300-2 hsx_mod-2-0-0-1
WWPN: 50001FE10015A374 Path State: Active
1 spa ZG10707577 2300-2 hsx_mod-2-0-1-1
WWPN: 50001FE10015A372 Path State: Standby
2 spa ZG10707577 2300-4 hsx_mod-4-0-0-1
WWPN: 50001FE10015A374 Path State: Standby
3 spa ZG10506937 2300-4 hsx_mod-4-0-1-1
WWPN: 50001FE10015A372 Path State: Available
# spmgr display –p path_instance
The -p path_instance displays path instance information.
Example:
# spmgr display -p hsx_mod-1-0-0-32
Server: sensodyne Report Created: Fri, Jul 12 11:18:39 2002
Command: spmgr display -p hsx_mod-1-0-0-32
Path: hsx_mod-1-0-0-32 Status: Standby
Controller: P56350A9IMN19M Status: Operational
Device: spak Status: Operational
Adapter: 2300-1
# spmgr display –r[v] [WWNN]
The -r switch displays storage system information. If a parameter is supplied, it
must be a
WWNN . The command has the following possible forms:
Syntax:
# spmgr display –r
–rv
–r
WWNN
–rv WWNN