HP StorageWorks Secure Path V3.0C for Linux and Linux Workgroup Edition Installation and Reference Guide (AA-RU7VD-TE, February 2004)

Managing Secure Path
65Secure Path v3.0C for Linux and Linux Workgroup Edition Installation and Reference Guide
For each of these command switches, this section presents:
■ Description
■ Syntax
# spmgr display
When you enter spmgr display, all information for the entire configuration is
displayed. The amount of information displayed depends on the number of HBAs,
storage systems, and paths to a unit on each storage system.
The full display derives from the component portions described in this section.
You can limit the amount of data displayed by combining the spmgr display
command with one of the described switches.
Example:
# spmgr display
Server: sensodyne Report Created: Fri, Jul 12 10:50:30 2002
Command: spmgr display
= = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =
Storage: 5008-05F3-0000-6FD0
Load Balance: Off Auto-restore: Off
Path Verify: On Verify Interval: 30
HBAs: 2300-1 2300-2
Controller: P56350A9IMN19M, Operational
P56350A9IMN0XI, Operational
Devices: spf spg sph spi
TGT/LUN Device WWLUN_ID #_Paths
0/ 0 spf 008-05F3-0000-6FD0-A977-751F-E54F-0022 2
Controller Path_Instance HBA Preferred? Path_Status
P56350A9IMN19M no
hsx_mod-1-0-0-1 2300-1 no Standby
Controller Path_Instance HBA Preferred? Path_Status
P56350A9IMN0XI YES
hsx_mod-2-0-0-1 2300-2 no Active
TGT/LUN Device WWLUN_ID #_Paths
0/ 1 spg 6008-05F3-0000-6FD0-A727-6527-BE0B-0027 2
Controller Path_Instance HBA Preferred? Path_Status